大理水控初始版本
diff --git a/lcd/glcd_spi.h b/lcd/glcd_spi.h
new file mode 100644
index 0000000..64a6249
--- /dev/null
+++ b/lcd/glcd_spi.h
@@ -0,0 +1,100 @@
+/**
+ * \file STM32F10x.h
+ * \brief Device implementation for ST STM32F10x ARM Cortex-M3 MCUs
+ * Requires the use of ST's Standard Peripheral Library
+ * \author Andy Gock
+ *
+ * \todo Code is untested!
+ */
+
+/*
+ Copyright (c) 2012, Andy Gock
+
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ * Neither the name of Andy Gock nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL ANDY GOCK BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+#ifndef __glcd_spi_h__
+#define __glcd_spi_h__
+
+#include "spi.h"
+
+/** SPI port number e.g SPI1, SPI2 (not to be confused with GPIOA, GPIOB, etc) */
+#define CONTROLLER_SPI_NUMBER
+#define CONTROLLER_SPI_PORT
+#define CONTROLLER_SPI_SCK_PIN
+#define CONTROLLER_SPI_SCK_PINSRC
+#define CONTROLLER_SPI_MISO_PIN
+#define CONTROLLER_SPI_MISO_PINSRC
+#define CONTROLLER_SPI_MOSI_PIN
+#define CONTROLLER_SPI_MOSI_PINSRC
+
+#define CONTROLLER_SPI_SS_PORT
+#define CONTROLLER_SPI_SS_PIN
+#define CONTROLLER_SPI_DC_PORT GPIOC
+#define CONTROLLER_SPI_DC_PIN GPIO_Pin_10
+#define CONTROLLER_SPI_RST_PORT GPIOC
+#define CONTROLLER_SPI_RST_PIN GPIO_Pin_11
+
+#define GLCD_SELECT() SPI_SELECT_CH2()
+#define GLCD_DESELECT() SPI_DESELECT_CH2()
+#define GLCD_DC_LOW() GPIO_ResetBits(CONTROLLER_SPI_DC_PORT,CONTROLLER_SPI_DC_PIN)
+#define GLCD_DC_HIGH() GPIO_SetBits(CONTROLLER_SPI_DC_PORT,CONTROLLER_SPI_DC_PIN)
+#define GLCD_A0_LOW() GPIO_ResetBits(CONTROLLER_SPI_DC_PORT,CONTROLLER_SPI_DC_PIN)
+#define GLCD_A0_HIGH() GPIO_SetBits(CONTROLLER_SPI_DC_PORT,CONTROLLER_SPI_DC_PIN)
+#define GLCD_RESET_LOW() GPIO_ResetBits(CONTROLLER_SPI_RST_PORT,CONTROLLER_SPI_RST_PIN)
+#define GLCD_RESET_HIGH() GPIO_SetBits(CONTROLLER_SPI_RST_PORT,CONTROLLER_SPI_RST_PIN)
+/*#ifdef HW_V01
+#define GLCD_BKL_ON() GPIO_SetBits(GPIOD, GPIO_Pin_2)
+#define GLCD_BKL_OFF() GPIO_ResetBits(GPIOD, GPIO_Pin_2)
+#endif
+#ifdef HW_V02*/
+#define GLCD_BKL_ON() GPIO_SetBits(GPIOA, GPIO_Pin_15)
+#define GLCD_BKL_OFF() GPIO_ResetBits(GPIOA, GPIO_Pin_15)
+//#endif
+
+/**
+ * Initialise the LCD. This function is platform and controller specific.
+ */
+void glcd_HW_init(void);
+
+/**
+ * Write a byte to the connected SPI slave.
+ * \param c Byte to be written
+ * \return Returned value from SPI (often not used)
+ */
+void glcd_spi_write(uint8_t c);
+
+
+/**
+ * Reset the LCD.
+ * \note Not all LCD controllers support reset.
+ */
+void glcd_reset(void);
+
+void glcd_bkl_on(void);
+
+void glcd_bkl_off(void);
+
+#endif
+/* __glcd_spi_h__ */